| General Specifications | |
| Item | Description |
| Throughput | 100 test/hour with 1/2 reagent |
| System type | Discreet. open, fully automated, patient prioritized, selectable 1/2 reagent system |
| Sample | Serum
Urine Plasma CSF Others |
| Measurement principle | Latex Enhanced Turbidimetric Immunoassay
Turbidimetric Immunoassay Photometric (Rate/end point) |
| Onboard Reagent Positions | 25 positions of 20 ml bottles for RI/R2 |
| Programmable parameters | 50 photometric tests |
| Assay modes | End Point
Fixed time (2-point) Kinetic Rate-A Kinetic Rate-B |
HRP Fully Automatic Analyzer
| Sample volume | 2-50 μl (adjustable in 0.1 μl step) |
| Reaction volume | 180μl to 5ooμl |
| Reaction temperature | 37 •c ± 0.2 •c |
| Reaction time | Single reagent chemistry.30-600sec,
Double reagent chemistry: 30-300sec |
| Calibration | Maximum 20 calibrators can be used
6 calibrators maximum per test On-board auto dilution Of Calibrator |
| Mixing type | Variable speeds paddle mixer (Low, Middle, High) |
| Maintenance | Auto scheduling — Start of Day, End of Day |
| Identification | Position Identification for samples and reagents
Fixed Bar code reader for Identification for samples |
| Water supply unit | NCCLS Type 2: Up to 4.5 liters/hour (approx) |
| Quality control | Up to 3 levels programmable for every parameter |
| System Warm-Up | 10 minutes system warm-up time. |
| Level sensing and mechanism | Vertical & horizontal obstruction detection Capacitance based liquid level sensing |
| Noise level | Less than 65 dB with cover closed |
| CPU & Display | P-IV with ( IGB)RAM, 40 GB or Higher Hard Drive,
CD-RW suitable WIN OS 15 inch TFT color display |
| Keyboard | Standard keyboard & standard mouse |
| Printer | External: A4 size Desk Jet color printer (Optional) |
| System interface | Analyzer — PC: RS-232C bi-directional, PC — Printer. USB (Min 2 Ports) & a Serial Port
PC — Host computer via serial RS232 or TCP/IP |
| Sample/Reagent unit | |
| Item | Description |
| Sample tray | Rotating Turn Table tray |
| Sample positions | 25 positions |
| Reagent positions | 25 positions |
| Sample container | Blood collection tube Of 5 ml volume Standard cup 2 ml |
| Reagent bottles | 20ml bottles |
| Reagent cooling | 15 deg C below ambient room temperature (approx 25 deg C) |
| STAT samples | Can be placed at any free position |
| Reagent volume | Reagent 1: 180 – 350 μl (adjustable in 1 μl step) Reagent 2: 10 – 350 μl (adjustable in 1 μl step) |
| Sample/Reagent Probe | Micro-pipette with level sensor |
| Sample dilution | Dilution ratio: 2 to 40 times |
| Real time reagent inventory | Displayed on screen in ml and Number of Tests |
| Turntable protection | Cover protection from evaporation, dust. and direct light |
| Carry over evasion | Wash with System water/ Reagent/Wash Solution |
| Cuvette washing | Number Of washing operation steps: 7 steps
Reaction waste removal: 1 step in CRU. |
| Optical unit | |
| Item | Description |
| Photometric system | Multiple wavelength, Maintenance free sealed filters with optical fibers |
| Wavelength range | 9 Wavelenghts: 340, 405, 450, 510, 546, 578, 620, 660, 690 |
| Wavelength selection | Mono or Dual (User selectable) |
| Cycle time | 30 seconds |
| Path Length | 5 mm |
| Resolution | 0.0001 OD |
| Photometer Linearity | Up to ± 3.0 Optical Density |
| Light source | Tungsten halogen lamp (12V 20 W) |
| Detector | Silicon photo-diode |
| Cuvette blanking | Water blank after the cuvette washing |
| Control Unit | |
| Item | Description |
| User interface hardware | PC: Windows machine, IBM compatible
OS: Windows XP (Service Pack 2)/Windows 7 CPU: Pentium IV, RAM: ( IGB), Hard disk: 40GB Console: 15 inch TFT color monitor Multimedia: Speakers with sound card External drives: CD-ROM drive |
| System interface | Analyzer – pc: RS-232C bi-directional (RS232-USB Converter) |
| Printer Option | External: A4 size color printer |
| Data Processing | |
| Description | |
| Calibration curves | K-Factor, Linear (one. two point and multipoint),
Logit-log (4P, 5P), Spline, Exponential, Polynomial Calibration history — last 10 for each parameter Flexibility of using previous factors |
| Quality control | Daily and Monthly L-J Graph plots
Mean, SD, %CV, R is calculated for each chemistry Real time quality control based on Multi-QC-rules |
| Sample Scheduling | Possible to make profiles for speedier scheduling
Possible for sample replication for same test Copy scheduling of 1 sample to other samples |
| Auto Re-run | Auto Rerun with sample dilution for greater than Linearity samples |
| Monitor function | Offline/Online reaction curve display Calibration curve graphical display Operation status by run monitor |
| Correlation Equation | Correlation correction factor (Y = ax + b) |
| Data storage capacity | Test results: 1,000,000 Reaction curve: 40,000 tests |
| Report/list format | Unique Alphanumeric patient id Report search: Patient wise, Test wise, Date wise, Doctor/Hospital wise etc. |
| Blanking correction | Sample Blank and Reagent Blank correction |
| Data check | Reference range check by age, sex. sample type Normal and high reaction linearity Reaction mixture absorbance checks |
| Password | Dual level access passwords |
| Installation Conditions | |
| Item | Description |
| Power source/ consumption | AC 220 V ± 10%, 50 Hz or AC 110 V ± 10%, 60 Hz Power consumption: 2000 VA |
| Water supply | De-ionized water consumption: 4.5 liter/hour |
| Ambient temperature | Approx 25 •C |
| Relative humidity | 40 — 80% free from water dew formation |
| Dimensions | 550 (W) x 420 (D) x 380 (H) |
| Weight | Approximately 30 kg. |
| Accessories/Consumables/Spares | |
| Item | Description |
| Installation parts | Cuvette set Operator Manual Application Software CD Reagent tray Reagent bottles Waste reservoir Waste connection tubes Connection cables kit |
| Consumables | Sample cup/tubes |
| Spares | Cuvettes Cuvette Drier Photometer Lamp Assembly Set of Fuses |
