The digital micro processor – based controller comes with a full spectrum of features. Two functions control modes provide the clinician more flexibility while optimizing the thermal environment. Dual digital temperature displays allow easy visualization of patient temperature and set Point.
Infant Radiant Warmer
CONTROL PANEL
The infant radiant warmer comes complete with automatic manual I baby (servo) I air modes. In addition, the skin/air temperature
Display is larger than other set temperature display. Skin temperature display can be converted from oc to OF by the push of a button. A big LCD is Provided for more information and visualization of the heater poer in manual and servo modes, a full complement of alarms provides safety and Convenience with both audible and visual indicators in the event of :
High temp./ low temp I system fail I probe failure I power failure I timer I heater/on (optional) only visual alarm provided
HEATER ASSEMBLY
The parabolic heater assembly located above the center of the support structure consists of an integral examination light and a 650 watts heating System ( silica or quartz / ceramic heater ) for quick warming and even distribution of heat on the baby bed. The heater can be swiveled in either Direction for takin x-ray and doing procedures
AIR MODE (Optional)
The system comes with air sensor. This is added security cover with exclusive feature of switching off the heater in case the sir temperature goes Above 390c irrespective of what the skin temperature is at the time of event
MANUAL MODE
The system automatically starts heating from 40% in manual mode and the same can be changed through setting upto 100%. The system Automatically converts from Servo mode to Manual mode in case of probe failure thus providing nonstop working of the unit.
BABY BED
The spacious baby bed incorporates easy drop down/fold down glasses from maximum access to the patient Optional : X-ray facility is provided below the baby bed for taking x-ray of the baby without disturbing
ADDITIONAL FEATURES
If needed the unit can be programmed by the user itself for any of the following features:
- Count up I down timer
- Check baby alarm
- Pre warming mode
DIMENSIONS (Approx)
| Technical specifications | Electrical specifications |
| Height – 1850mm | Power supply – 200 V/50 Htz |
| Length – 1050mm | Heater power – 650 watts |
| Width – 650mm | Fuse – 5 amp |
CASTORS
The system is fitted with 4″ high quality castors having brakes in front of 2 castors. Antistatic castors can be fitted as an option for
Further safety in lieu of the standard castors.
Optional : the system comes with check baby alarm ( 1-120min. )
